Seachem

Sort By:  
Seachem Flourish Potassium - 8.5 oz (250 mL)
Seachem Flourish Potassium - 8.5 oz (250 mL) ('116046602)
8.5 oz (250 mL)

Seachem Flourish Potassium provides concentrated potassium to support vigorous growth in aquariums with natural, living plants. This safe, effective supplement helps you avoid potassium depletion, yellowing leaves, and limited plant growth.

  • Potassium supplement for the planted aquarium
  • Helps maintain a vigorous level of plant growth
  • Helps resolve yellowing, death/browning and weak stems and roots

Flourish Potassium contains 50,000 mg/L of potassium - one of the highest concentrations available. Water with low mineral content or systems with rapidly growing live plants can quickly deplete available potassium, causing potassium to become the limiting factor for further growth. Use Flourish Potassium to prevent potassium depletion (signs of which include yellowing in older leaves) and maintain the highest level of growth.

Potassium is most easily obtained from potassium nitrate and potassium phosphate, both of which add either nitrogen or phosphorus to the water and make it more difficult to maintain a specific NPK ratio. However, Flourish Potassium is derived from potassium sulfate, which lets you adjust potassium levels without affecting your tanks nitrogen or phosphorus.

Directions: Use 1 capful (5 mL) for every 125 L (30 gallons). This dose raises potassium by 2 mg/L. Repeat 2?

$12.54
Seachem Flourish Potassium - 17 oz (500 mL)
Seachem Flourish Potassium - 17 oz (500 mL) ('116046305)
17 oz (500 mL)

Seachem Flourish Potassium provides concentrated potassium to support vigorous growth in aquariums with natural, living plants. This safe, effective supplement helps you avoid potassium depletion, yellowing leaves, and limited plant growth.

  • Potassium supplement for the planted aquarium
  • Helps maintain a vigorous level of plant growth
  • Helps resolve yellowing, death/browning and weak stems and roots

Flourish Potassium contains 50,000 mg/L of potassium - one of the highest concentrations available. Water with low mineral content or systems with rapidly growing live plants can quickly deplete available potassium, causing potassium to become the limiting factor for further growth. Use Flourish Potassium to prevent potassium depletion (signs of which include yellowing in older leaves) and maintain the highest level of growth.

Potassium is most easily obtained from potassium nitrate and potassium phosphate, both of which add either nitrogen or phosphorus to the water and make it more difficult to maintain a specific NPK ratio. However, Flourish Potassium is derived from potassium sulfate, which lets you adjust potassium levels without affecting your tanks nitrogen or phosphorus.

Directions: Use 1 capful (5 mL) for every 125 L (30 gallons). This dose raises potassium by 2 mg/L. Repeat 2?

$26.49
Seachem Flourish Excel Organic Carbon - 68 oz
Seachem Flourish Excel Organic Carbon - 68 oz ('116045803)
68 oz

Seachem Flourish Excel is a source of bioavailable organic carbon. All plants require a source of carbon. This is typically obtained from CO2, but, may also be derived from simple organic compounds (such as photosynthetic intermediates).

  • Provides aquarium plants with a source of essential carbon
  • Great for use alone or in conjunction with CO2 injection
  • Iron reducing properties to promote ferrous state of iron

One can derive a substantial benefit with the use of Flourish Excel either alone or in conjunction with CO2 injection. Flourish Excel also has iron reducing properties which promote the ferrous state of iron (Fe+2), which is more easily utilized by plants than ferric iron (Fe+3).

Seachem Flourish Excel is an integral component of Seachems plant products and is recommended for use with the entire Flourish line as well as our Flourite and Onyx Sand substrates. Contains no phosphate or nitrate.

Directions: On initial use or after a major (> 40%) water change, use 1 capful (5 mL) for every 40 L (10 gallons). Thereafter use 1 capful for every 200 L (50 gallons) daily or every other day. Dosing may be slowly increased in high-growth aquariums. For smaller dosing please note that each cap thread is approximately 1 mL.

$57.00
Seachem Flourish Excel Organic Carbon - 8.5 oz
Seachem Flourish Excel Organic Carbon - 8.5 oz ('116045605)
8.5 oz

Seachem Flourish Excel is a source of bioavailable organic carbon. All plants require a source of carbon. This is typically obtained from CO2, but, may also be derived from simple organic compounds (such as photosynthetic intermediates).

  • Provides aquarium plants with a source of essential carbon
  • Great for use alone or in conjunction with CO2 injection
  • Iron reducing properties to promote ferrous state of iron

One can derive a substantial benefit with the use of Flourish Excel either alone or in conjunction with CO2 injection. Flourish Excel also has iron reducing properties which promote the ferrous state of iron (Fe+2), which is more easily utilized by plants than ferric iron (Fe+3).

Seachem Flourish Excel is an integral component of Seachems plant products and is recommended for use with the entire Flourish line as well as our Flourite and Onyx Sand substrates. Contains no phosphate or nitrate.

Directions: On initial use or after a major (> 40%) water change, use 1 capful (5 mL) for every 40 L (10 gallons). Thereafter use 1 capful for every 200 L (50 gallons) daily or every other day. Dosing may be slowly increased in high-growth aquariums. For smaller dosing please note that each cap thread is approximately 1 mL.

$12.54
Seachem Flourish Excel Organic Carbon - 17 oz
Seachem Flourish Excel Organic Carbon - 17 oz ('116045308)
17 oz

Seachem Flourish Excel is a source of bioavailable organic carbon. All plants require a source of carbon. This is typically obtained from CO2, but, may also be derived from simple organic compounds (such as photosynthetic intermediates).

  • Provides aquarium plants with a source of essential carbon
  • Great for use alone or in conjunction with CO2 injection
  • Iron reducing properties to promote ferrous state of iron

One can derive a substantial benefit with the use of Flourish Excel either alone or in conjunction with CO2 injection. Flourish Excel also has iron reducing properties which promote the ferrous state of iron (Fe+2), which is more easily utilized by plants than ferric iron (Fe+3).

Seachem Flourish Excel is an integral component of Seachems plant products and is recommended for use with the entire Flourish line as well as our Flourite and Onyx Sand substrates. Contains no phosphate or nitrate.

Directions: On initial use or after a major (> 40%) water change, use 1 capful (5 mL) for every 40 L (10 gallons). Thereafter use 1 capful for every 200 L (50 gallons) daily or every other day. Dosing may be slowly increased in high-growth aquariums. For smaller dosing please note that each cap thread is approximately 1 mL.

$26.49
Seachem Equilibrium Mineral Balance & GH Water Treatment - 10.5 oz
Seachem Equilibrium Mineral Balance & GH Water Treatment - 10.5 oz ('116044608)
10.5 oz

Equilibrium is specifically designed to establish the ideal mineral content for the planted aquarium. Equilibrium contains no sodium or chloride (which can be detrimental to a planted aquarium at elevated levels). Equilibrium is ideally suited for use with RO (reverse osmosis) or DI (deionized) water or any mineral deficient water. Equilibrium raises the essential mineral/electrolyte content (General Hardness) of the water to balance with and promote stability of the carbonate hardness. To maintain KH, we recommend Alkaline Buffer. Equilibrium contains NO SODIUM CHLORIDE. Both sodium and chloride are not rapidly depleted elements in a planted aquarium, and, in the case of chloride, can do more harm than good. Also, sodium is not a contributing cation to GH levels. Equilibrium contains only calcium, magnesium, and potassium salts, which aid in fish metabolism but are also highly beneficial to plant growth. Equilibrium guaranteed analysis and symptoms of deficiency

  • Restores and Maintains Mineral Balance and GH
  • Contains No Sodium or Chloride
  • Fast Dissolving Powder Repaces Minerals for Healthy Plant Growth
  • Reverse Osmosis Water Conditioner for Freshwater Planted Aquariums
  • Made in the USA

INSTRUCTIONS: To raise mineral content/general hardness (GH) by 1 meq/L (3 dH), add 16 g (1 tablespoon) for every 80 L (20 US gallons) when setting up an aquarium or when making water changes (add to new water). For optimum solubility, we recommend mixing with 1 L (1 qt.) of water (the resulting mixture will have a white opaque appearance). When this mixture is added to the aquarium it will impart a slight haze that should clear within 15-30 minutes. HINTS: Do not use Equilibrium when replacing evaporated water. This dose is based on DI or RO water; for other water, measure hardness (GH) first, then add according to need. For precise dosing, use the Seachem Digital Spoon Scale. Plant preferences vary, but a general guide is about 1-2 meq/L (3-6 dH) or match the existing or target carbonate hardness (KH), which, ideally, is also about 1-2 meq/L (3-6 dKH). Equilibrium will compact with age, but remains effective.

INGREDIENTS: Amounts per 1g Calcium (Ca) (min) 155 mg calcium (Ca) (max) 160 mg Magnesium (Mg) (min) 8 mg strontium (Sr) (min) 0.16 mg

$13.21
Seachem Prime Water Conditioner F/W &S/W - 4 Liters (1.1 Gallon)
Seachem Prime Water Conditioner F/W &S/W - 4 Liters (1.1 Gallon) ('116043908)
4 Liters (1.1 Gallon)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 ??C (86 ??F) and chlorine or ammonia levels are low, use a half dose.

$107.44
Seachem Prime Water Conditioner F/W &S/W - 2 Liters (67.6 oz)
Seachem Prime Water Conditioner F/W &S/W - 2 Liters (67.6 oz) ('116043809)
2 Liters (67.6 oz)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 ??C (86 ??F) and chlorine or ammonia levels are low, use a half dose.

$71.24
Seachem Prime Water Conditioner F/W &S/W - 1 Liter (33.8 oz)
Seachem Prime Water Conditioner F/W &S/W - 1 Liter (33.8 oz) ('116043700)
1 Liter (33.8 oz)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 ??C (86 ??F) and chlorine or ammonia levels are low, use a half dose.

$52.57
Seachem Prime Water Conditioner F/W &S/W - 250 ml (8.5 oz)
Seachem Prime Water Conditioner F/W &S/W - 250 ml (8.5 oz) ('116043601)
250 ml (8.5 oz)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 ??C (86 ??F) and chlorine or ammonia levels are low, use a half dose.

$15.64
Seachem Prime Water Conditioner F/W &S/W - 100 ml (3.4 oz)
Seachem Prime Water Conditioner F/W &S/W - 100 ml (3.4 oz) ('116043502)
100 ml (3.4 oz)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 ??C (86 ??F) and chlorine or ammonia levels are low, use a half dose.

$9.23
Seachem Prime Water Conditioner F/W &S/W - 50 ml (1.7 oz)
Seachem Prime Water Conditioner F/W &S/W - 50 ml (1.7 oz) ('116043403)
50 ml (1.7 oz)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 ??C (86 ??F) and chlorine or ammonia levels are low, use a half dose.

$7.18
Seachem Prime Water Conditioner F/W &S/W - 500 ml (16.9 oz)
Seachem Prime Water Conditioner F/W &S/W - 500 ml (16.9 oz) ('116043304)
500 ml (16.9 oz)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 ??C (86 ??F) and chlorine or ammonia levels are low, use a half dose.

$34.05
Seachem Prime Water Conditioner F/W &S/W - 20 Liters (5.3 Gallons)
Seachem Prime Water Conditioner F/W &S/W - 20 Liters (5.3 Gallons) ('116043106)
20 Liters (5.3 Gallons)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 ??C (86 ??F) and chlorine or ammonia levels are low, use a half dose.

$445.24
Seachem Betta Basics Aquarium Water Conditioner - 2 oz
Seachem Betta Basics Aquarium Water Conditioner - 2 oz ('116042406)
2 oz

Seachem Betta Basics is formulated to create the ideal bowl environment for both your bettas and plants. It works by removing any chlorine, chloramine and detoxifies ammonia. It also buffers the water to a pH of 7.0 to provide a healthy environment for fish and plant.

  • Removes Any Chlorine, Chloramine, And Ammonia
  • Buffers water to a pH of 7
  • Creates ideal environment both bettas and plants

$6.38
Seachem Safe Powder - 2.2 lbs
Seachem Safe Powder - 2.2 lbs ('116038706)
2.2 lbs

Seachem Safe Powder is a concentrated dry conditioner for freshwater and saltwater aquariums. This concentrated conditioning powder removes chlorine and chloramine from tap water, detoxifies nitrite and nitrate, and converts ammonia into a safe, non-toxic form for more efficient removal by the biofilter.

  • Removes chlorine, chloramine and ammonia from water
  • Detoxifies nitrite and nitrate
  • Non-acidic, highly effective dry conditioner for fresh and saltwater

Seachem Safe Powder will not impact pH levels or overactivate skimmers. It may be used during tank cycling to alleviate ammonia/nitrite toxicity, during start-up or whenever adding or replacing water.

Note: Safe is the dry version of Seachem Prime and shares all of its advantages; however, Safe is even more concentrated than Prime.

Directions for Use:
Note: These directions supersede all other prior packaging.

Directions for 10 g and 50 g:
Use 100 mg Safe (scoop) per each 100 L (25 gallons) as needed to reduce chlorine and chloramine or per 25 L (6 gallons) for ammonia.

Directions for all other sizes:
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 gallons) for ammonia.

May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 ??C (86 ??F) and chlorine or ammonia levels are low, use a half dose.

$56.98
Seachem Reef Strontium Raises Strontium for Aquariums - 8.5 oz
Seachem Reef Strontium Raises Strontium for Aquariums - 8.5 oz ('116037600)
8.5 oz

Reef Strontium's addition to reef aquariums aids the growth of corals, coralline algae, and other organisms that lay down a calcareous skeleton or shell, including tridacnid clams. Reef Strontium is intended to restore and maintain strontium to levels found within natural seawater without affecting pH. Strontium is utilized in the same manner as calcium and holds a similar importance in maintaining a vigorous level of growth.

  • Seachem Reef Strontium aids in healthy growth of corals and coralline algae
  • Restores and maintains strontium in reef aquariums
  • Gluconate complexation provides a rich source of metabolic energy

Reef Strontium contains 10,000 mg/L of available strontium as a gluconate complex. Gluconate complexation offers several benefits: it increases the bioavailability of the strontium, it provides a rich source of metabolic energy to help maintain peak coral growth, and it inhibits strontium precipitation/alkalinity depletion. Gluconate does not contain nitrogen or phosphorus, making it biologically impossible for it to lead to algae growth in a properly maintained reef system.

DIRECTIONS: Use 1 capful (5 mL) per 80 L (20 US gallons) twice a week.

$12.11
Seachem Reef Builder - 10.6 oz
Seachem Reef Builder - 10.6 oz ('116036603)
10.6 oz

Seachem Reef Builder supplies the carbonates and calcium which are essential for all coral growth. It also raises carbonate alkalinity without immediately impacting water pH, and will stabilize aquarium water at pH 8.3 with long term use.

  • Raises carbonate alkalinity (KH) with minimal pH impact
  • Provides a blend of carbonate sources that will not lower pH
  • Will not deplete calcium, magnesium, or strontium
  • Promotes healthy coral growth

If either calcium or carbonates become deficient, coral growth will cease, followed by a rapid decline in coral health. Used as directed, Seachem Reef Builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity.

Seachem Reef Builder and Reef Buffer may be used together: use Reef Builder to raise carbonate alkalinity without affecting pH, and use Reef Buffer to raise carbonate alkalinity and pH. As a general rule, reef alkalinity should be maintained at 3?

$22.87
Seachem Reef Builder - 1.3 lbs
Seachem Reef Builder - 1.3 lbs ('116036306)
1.3 lbs

Seachem Reef Builder supplies the carbonates and calcium which are essential for all coral growth. It also raises carbonate alkalinity without immediately impacting water pH, and will stabilize aquarium water at pH 8.3 with long term use.

  • Raises carbonate alkalinity (KH) with minimal pH impact
  • Provides a blend of carbonate sources that will not lower pH
  • Will not deplete calcium, magnesium, or strontium
  • Promotes healthy coral growth

If either calcium or carbonates become deficient, coral growth will cease, followed by a rapid decline in coral health. Used as directed, Seachem Reef Builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity.

Seachem Reef Builder and Reef Buffer may be used together: use Reef Builder to raise carbonate alkalinity without affecting pH, and use Reef Buffer to raise carbonate alkalinity and pH. As a general rule, reef alkalinity should be maintained at 3?

$27.79
Seachem Reef Calcium - 8.5 oz
Seachem Reef Calcium - 8.5 oz ('116035606)
8.5 oz

Reef Calcium is a concentrated (50,000 mg/L) bioavailable polygluconate complexed calcium intended to maintain calcium in the reef aquarium without altering pH. Polygluconate complexation confers several benefits: it increases the bioavailability of the calcium, it provides a rich source of metabolic energy to help maintain peak coral growth, and it prevents calcium precipitation/alkalinity depletion. Polygluconate contains no nitrogen or phosphorous, thus it is biologically impossible for it to lead to algae growth in a properly maintained reef system.

  • Maintains calcium
  • Accelerates coral growth
  • Will not alter pH

Reef Calcium may be used alone to maintain calcium but will provide enhanced levels of coral growth when used in conjunction with an ionic calcium supplement. Reef Calcium is intended to maintain calcium levels; if calcium becomes seriously depleted one should either perform a water change or use an ionic calcium supplement to restore the depleted level of calcium.

$11.08
Seachem Reef Calcium - 16.9 oz
Seachem Reef Calcium - 16.9 oz ('116035309)
16.9 oz

Reef Calcium is a concentrated (50,000 mg/L) bioavailable polygluconate complexed calcium intended to maintain calcium in the reef aquarium without altering pH. Additionally, polygluconate contains no nitrogen or phosphorous, thus it is biologically impossible for it to lead to algae growth in a properly maintained reef system. Reef Calcium utilizes a chained organic calcium rather than an ionic calcium. When a coral absorbs a molecule into its tissue, it uses the same amount of energy regardless of molecular size. However, charged molecules require more energy. When an uncharged molecule of Reef Calcium is absorbed, the coral acquires multiple calcium atoms as well as an easily metabolized carbohydrate with less energy expended than it uses for ionic calcium uptake. Therefore, at lower calcium levels, corals can still take in as much calcium through our organic chains as they would at much higher levels of ionic calcium.

  • Increases the bioavailability of the calcium
  • Provides a rich source of metabolic energy
  • Maintains peak coral growth
  • Prevents calcium precipitation/alkalinity depletion
  • Will not lead to algae growth in a properly maintained reef system

Directions: Add 1 capful (5 mL) per 80 L (20 US gallons) twice a week. You can increase the amount or frequency based on growth response but do not exceed 3 capfuls per 80 L (20 gallons) per day. Each capful will raise calcium by about 3 mg/L.

$26.18
Seachem Marine Buffer - 2.2 lbs
Seachem Marine Buffer - 2.2 lbs ('116034708)
2.2 lbs

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

  • Safely raises and maintains saltwater pH to 8.3
  • More stable than sodium bicarbonate or sodium bicarbonate substitutes
  • Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

$41.77
Seachem Marine Buffer - 9 oz
Seachem Marine Buffer - 9 oz ('116034609)
9 oz

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

  • Safely raises and maintains saltwater pH to 8.3
  • More stable than sodium bicarbonate or sodium bicarbonate substitutes
  • Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

$12.79
Seachem Marine Buffer - 1.1 lbs
Seachem Marine Buffer - 1.1 lbs ('116034302)
1.1 lbs

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

  • Safely raises and maintains saltwater pH to 8.3
  • More stable than sodium bicarbonate or sodium bicarbonate substitutes
  • Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

$27.79
Seachem Reef Complete - Raises Calcium Levels - 17 oz
Seachem Reef Complete - Raises Calcium Levels - 17 oz ('116033305)
17 oz

Reef Complete is a concentrated (160,000 mg/L) optimized blend of ionic calcium designed to restore and maintain calcium to levels found in natural seawater without affecting pH. Calcium and carbonates are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. To prevent this you must provide calcium (Reef complete) and carbonates (Reef Builder or Reef Carbonate) Reef Complete also includes magnesium and strontium in amounts proportionate to typical utilization ratios (100:5:0.1, Ca:Mg: Sr). This allows one to maintain these two important elements while maintaining calcium. Reef Complete is a blended product. It is not simply calcium chloride. Commercially available calcium chloride contains ammonia. Unlike other ionic calcium supplements, Reef Complete is blended to a higher pH to force the ammonia to gas off into the atmosphere. Also, Reef Complete is more concentrated than any other liquid product on the market. Reef Complete contains 160,000 ppm calcium.

  • Liquid Ionic Calcium Source
  • Maintains Magnesium & Strontium
  • Raises Calcium
  • Essential to Coral Growth
  • Will Not Affect pH

INSTRUCTIONS: Beginner: Use 1 capful (5 mL) per 80 L (20 US gallons) twice a week. Check calcium every 2 weeks and adjust the amount or frequency accordingly

Advanced: Check calcium level (use Reef Status: Calcium to measure calcium), then follow the addition regimen above until calcium is adjusted to 380-420 mg/L. Each 5 mL/80 L (20 US gallons) will raise calcium by about 10 mg/L. Quantity or frequency can be adjusted, but do not exceed 12.5 mL/80 L (20 US gallons) per day. Thereafter, use as required to maintain calcium.

Expert: After determining the calcium consumption rate, set up a continuous drip system. Use the following formula (or skip the math and use our Dosage Calculator) to determine how much to add to your top off water: m=vc/160 (m=mL of product to add to top off water, v=volume of the tank in liters, c=amount to raise calcium in mg/L). [For reference: 1 US gallon=3.8 L].

If used with Reef Calcium, it is not necessary to exceed 380 mg/L total calcium. Use Reef Status: Calcium to measure calcium.

DO NOT OVERDOSE: Excess calcium may enhance the loss of carbonate alkalinity. Do not directly mix with any carbonate supplement. Best if calcium & carbonate additives are added on alternate days or at least 30 minutes apart.

INGREDIENTS: Amounts per 1g Calcium (Ca) (min)

$25.84
Seachem Silicone Sealant Black - 3 oz
Seachem Silicone Sealant Black - 3 oz ('116031295)
3 oz

Seachem Silicone Sealant is a top-of-the-line 100% RTV silicone sealant designed to seal and repair freshwater and saltwater aquariums. The formula creates a permanently flexible, watertight seal with a high tensile strength that won't crack, dissolve or shrink from the pressure or stress caused by the weight of water in your tank. The solution provides unmatched adhesion and sports a clear color.

  • High quality silicone sealant
  • 100% RTV silicone
  • Suitable for freshwater and saltwater aquariums
  • Won't crack, dissolve or shrink
  • Provides a watertight seal

The sealant is black in color and comes in a 3 oz tube

$12.77
Seachem Silicone Sealant Clear - 3 oz
Seachem Silicone Sealant Clear - 3 oz ('116031271)
3 oz

Seachem Silicone Sealant is a top-of-the-line 100% RTV silicone sealant designed to seal and repair freshwater and saltwater aquariums. The formula creates a permanently flexible, watertight seal with a high tensile strength that won't crack, dissolve or shrink from the pressure or stress caused by the weight of water in your tank. The solution provides unmatched adhesion and sports a clear color.

  • High quality silicone sealant
  • 100% RTV silicone
  • Suitable for freshwater and saltwater aquariums
  • Won't crack, dissolve or shrink
  • Provides a watertight seal

The sealant is clear in color and comes in a 3 oz tube

$11.64
Seachem Flourish Epoxy Brown - 4 oz
Seachem Flourish Epoxy Brown - 4 oz ('116031264)
4 oz

Struggling with your aquatic hardscape designs Well, Seachem has a solution for you! Flourish Epoxy is a powerful epoxy adhesive that helps safely and securely create planted aquarium hardscape designs out of materials such as rocks and driftwood. Simply balancing large piles of rocks in the aquarium can result in these structures collapsing and damaging your aquarium or worse, harming your fish. Instead of leaving it up to chance, use Flourish Epoxy to secure your hardscapes. For added benefit, the solution is incredibly fast-acting, with a working time of only 5 minutes and will fully cure both submerged or emerged within 24 hours! Completely safe for even the most sensitive aquarium inhabitants.

  • Powerful epoxy adhesive
  • Ideal for planted tank hardscapes
  • Safely secures rocks and driftwood
  • Fully cures within 24 hours
  • Safe for all aquarium inhabitants

The epoxy is brown in color and comes in a 4 oz tube

$14.56
Per Page      57 - 84 of 143